30t/h Middle Scale Dry Mortar Plant

Introduction

QIC 30T/h dry powder mortar plant adopted latest Germany Technology,the silo is in tower type,and latest management system applied in automatic control,improved the man-friendly operation and automatic in large extent.The capacity of this automatic dry mortar production line at 3-10 thousand tons one year.

The main components and working principle of QIC 30T/h dry powder mortar plant
Raw material storing system, automatic weighing system, conveying system,mixing system, pneumatic system, packing system and dedusting system, the main control system administrate the production order based on fixed formula ratio, thus the production line dosing the coarse materials from storage silos, after automatic weighing,the material will enter in premix tank and high efficient agravic mixer continuously, to mix in a short period (3-5min). The well mixed material will discharge into the holding tank, which will make secondary mixing, then down to new designed automatic filling and packing machine, the packing machine work efficiently based on fixed time and volume, it increase the capacity sharply, well packed finished mortar will be transferred to finished mortar area, ready for sale.

Parameters

Structure Style	Annual Production	Model	Mixer Specifications		Theoretic Productivity
Structure Style	Annual Production	Model	Standard Configuration	Minimum Configuration	（t/h）
Tower type dry mortar production line	200k Tons	HSTL40B	LDH2000	WSH6000	40
	300k Tons	HSTL60B	LDH3000	WSH10000	60
	400k Tons	HSTL80B	LDH4500	WSH12000	80
	200k+50k Tons	HSTL40C	LDH2000/+LDH600	WSH6000+LDH600	40+10
	300k+50k Tons	HSTL60C	LDH3000+LDH600	WSH10000+LDH600	60+10
	400k+50k Tons	HSTL80C	LDH4500+LDH1600	WSH10000+LDH600	80+10
Stair type dry mortar production line	200k Tons	HSTL40B	LDH2000	WSH6000	40
	300k Tons	HSTL60B	LDH3000	WSH10000	60
	400k Tons	HSTL80B	LDH4500	WSH12000	80
	200k+50k Tons	HSJZ40C	LDH2000/+LDH600	WSH6000+LDH600	40+10
	300k+50k Tons	HSJZ60C	LDH3000+LDH600	WSH10000+LDH600	60+10
	400k+50k Tons	HSJZ80C	LDH4500+LDH1600	WSH10000+LDH600	80+10
Block type dry mortar production line	200k Tons	HSLZ40B	LDH2000	WSH6000	40
	300k Tons	HSLZ60B	LDH3000	WSH10000	60
	400k Tons	HSLZ80B	LDH4500	WSH12000	80
Flat type dry mortar production line (No grading of sand)	200k Tons	HSZ40B	LDH2000	WSH6000	40
	300k Tons	HSZ60B	LDH3000	WSH10000	60
	400k Tons	HSZ80B	LDH4500	WSH12000	80
Note: The annual production in this table refers to ordinary mortar, according to 16 working hours per day, 300 days a year. The standard configuration adopts LDH coulter type mixer as main engine, and the minimum configuration adopts WSH dual shaft agravic paddle mixer.

Advantages

1. High cost effective
It is a production project for external wall insulation and decorative mortar, which not only has low investment and high efficiency, but also avoids idle equipment and waste of resources caused by excessive investment.

2. Good dispersion
The interior of the mixer adopts a unique structural design, which can effectively disperse polypropylene fibers and wood fibers, and completely solve the problems of segregation and secondary fiber agglomeration caused by the specific gravity of the material.

3. Wide range of use
The equipment can meet the production needs of dry mortar with the same performance requirements. Such as: masonry mortar, plastering mortar, mortar required for thermal insulation system, decorative mortar and other dry mortar.

4. The mixing uniformity is above 99%
The mortar can be mixed well in about 1-3 minutes. It has the unique mixing principle and mixer design to reduce energy consumption on the basis of mixing quality and high efficiency.

Pictures